we Hitech Engineer manufacturers and exporters of servo stabilizer.
Oil Cooled Stabilizer (Capacity 3 KVA to 2000KVA )
Technical Specifications:
Input Voltage 300V-470V(Suitable for unbalanced or balanced voltage conditions)
Output Voltage 400+1%(Can be set anywhere between 380V to 415V
Output Regulation +1% of the set voltage over the specified Input range from no load to full load.
Output Wave from Exact Reproduction of the input.
Distortion No wave from distribution introduced.
Frequency 50+3Hz.
No.of phase 2 or 3
Efficiency Better than 95%.(Typically 98%)
Correction Rate 60V/sec, 20V/sec/
Effect of Load Power Factor Nill
Insulation Class “B”.
Operational Temperature Operational Temperature
Operational Temperature 110%continuos, 125%for 3 to 5Sec, 300% momentary.
Termination By suitable capacity of Terminal Connectors/porcelain insulated brass studs provided for input and output(four wire).
Panel Controls Output voltage set adjustment, Auto/manual switch, Increase/decrease by spring loaded toggle switch in manual mode, Voltage selector switch, Current selector switch , Emergency bypass(All protections bypass).
Indications Input high, Input on, Output on, Voltage normal, Output Trip.
Optionals Voltage ranges : custom built designs shall be undertaken, Digital Voltameter/Ammeter, Digital Frequency Indication, Over frequency/Under frequency trip unit, Additional sensing and termination can be provided for Alarm/Hooter, MCC for input (Normally we provide precise overload output through electronic sensing circuit with contractor ), EMI/RF Filter.
Silent Features:
Complete IC version.
Precise electronic sensing for all trips.
Electronic circuits for generator power application.
Very High Efficiency No effect of power factor.
Suitable for unbalanced input voltage conditions and unbalanced load conditions.
Good quality of lamination & copper wires.
any requirement whats app me - 070596 30001